95-dB step attenuator suitable for automated Wi-Fi 6E testing

September 29, 2020 //By Jean-Pierre Joosting
JFW step attenuator assembly models to automate Wi-Fi 6E testing
JFW is offering two step attenuator models for automated Wi-Fi 6E testing that both use 0-95-dB x 1-dB step attenuators that operate from 0.2 to 8 GHz.

Both models feature Ethernet and Serial remote control with a command set that is script friendly.

Model 50PA-1183-XX contains up to 8 attenuators and has a 19 inch rack mount chassis. If you order this model with 4 attenuators for your current testing needs, it can be later expanded to have up to a maximum of 8 attenuators.

Model 50BA-048-95 contains 2 attenuators and has a benchtop enclosure. This model also displays the current attenuation of both attenuators. If the attenuation is changed remotely, then the dB values shown on the front panel will update accordingly. The two manual levers on the front panel allow for quick and easy manual control of both attenuators.

www.jfwindustries.com


Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.